TRB245

MOBILE
Mobile module : 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
SIM switch : 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail
Status : Signal strength, Connected band, SINR, RSRP, RSRQ, Bytes sent/received
Bridge : Direct connection (bridge) between mobile ISP and device on LAN
SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (planned), SMS to EMAIL (planned), SMS to HTTP (planned), SMS to SMS (planned), scheduled SMS (planned), SMS autoreply (planned)
Black/White list (planned) : Operator black/white list
Multiple PDN (planned) : Possibility to use different PDNs for multiple network access and services
Band management : Used band status display, Band lock (planned)
APN : Auto APN
ETHERNET
LAN : 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
Routing : Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned)
Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP (planned), SSH, DHCP, Telnet, MQTT (planned), Wake On Lan (WOL) (planned)
VoIP passthrough support (planned) : H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring : Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall : Port forward, traffic rules, custom rules
QoS / Smart Queue Management (SQM) (planned) : Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS (planned) : Supported >25 service providers, others can be configured manually
SSHFS (planned) : Possibility to mount remote file system via SSH protocol
SECURITY
Authentication : Pre-shared key, digital certificates, X.509 certificates
Firewall : Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention (planned) : DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN (planned) : Tag based VLAN separation
Mobile quota control : Custom data limits for both SIM cards
WEB filter (planned) : Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control : Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN : Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption : DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPSec : IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
PPTP, L2TP : Client/Server services can run simultaneously
DMVPN (planned) : Method of building scalable IPsec VPNs
GRE (planned) : GRE tunnel
SERIAL COMMMUNICATION MODES
Modes : Console, OverIP, Modem (planned), Modbus RTU master, Modbus gateway, NTRIP client (planned)
MODBUS
MODBUS TCP SLAVE
ID filtering : Respond to one ID in range [1;255] or any
Allow remote access : Allow access through WAN
Custom registers : Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions : 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS RTU MASTER
Supported baud rates : From 300 to 3000000
Supported functions : 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits : 7 or 8
Number of stop bits : 1 or 2
Parity bits : None, Even, Odd
Flow control : None, RTS/CTS (only for RS232 interface), Xon/Xoff
MQTT GATEWAY
Gateway : Allows sending commands and receiving data from Modbus Master trough MQTT broker
MODBUS DATA TO SERVER
Protocols : HTTP(S), MQTT, Azure MQTT (planned)
MONITORING & MANAGEMENT
WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA : Firmware update from server, automatic notification
SSH : SSH (v1, v2)
SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call (planned) : Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
TR-069 (planned) : OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT (planned) : MQTT Broker, MQTT publisher
SNMP (planned) : SNMP (v1, v2, v3), SNMP Trap
JSON-RPC : Management API over HTTP/HTTPS
Modbus : Modbus TCP status/control
RMS : Teltonika Remote Management Systems (RMS)
IoT PLATFORMS
Cloud of Things (planned) : Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx (planned) : Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity (planned) : Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub (planned) : Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPU : Qualcomm QCA9531, MIPS 24kc, 650 MHz
RAM : 64 MB, DDR2
Flash memory : 16MB SPI Flash (4 MB available for user)
FIRMWARE / CONFIGURATION
WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA : Update FW/configuration from server
RMS : Update FW/configuration for multiple devices
Keep settings : Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system : RutOS (OpenWrt based Linux OS)
Supported languages : Busybox shell, Lua, C, C++
Development tools : SDK package with build environment provided
LOCATION TRACKING
GNSS : GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates (planned) : GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA : NMEA 0183
NTRIP : (planned) NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server software (planned) : Supported server software TAVL, RMS
Mobile Network Geolocating : Location without using GPS, get approximate location based on mobile tower on RMS
Geofencing (planned) : Configurable multiple geofence zones
INPUT/OUTPUT
Configurable I/O : 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA
Analog input : 1 x Analog input (0 - 30 V)
Events (planned) : SMS, Email
Output control : HTTP POST/GET, Schedule
I/O juggler (planned) : Allows to set certain I/O conditions to initiate event
SERIAL
RS232 : Terminal block connector: TX, RX, RTS, CTS
RS485 : Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)
Supported baud rates : From 300 to 3000000
Number of data bits : 7 or 8
Number of stop bits : 1 or 2
Parity : None, Even, Odd
Flow control : None, RTS/CTS (only for RS232 interface), Xon/Xoff
POWER
Connector : 2 pins in 16 pin industrial terminal block
Input voltage range : 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max
Power consumption : Idle: <1.2 W, Max: <5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM)
Ethernet : 1 x RJ45 port, 10/100 Mbps
I/O’s : 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block
Status LEDs : 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED
SIM : 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray
Power : 2 pins in 16 pin terminal block
Antennas : 1 x SMA connector for LTE, 1 x SMA connector for GNSS
RS232 : 4 pins in 16 pin terminal block (TX, RX, RTS, CTS)
RS485 : 4 pins in 16 pin terminal block (D+, D-, R+, R-)
Reset : Reboot, restore to user default (planned), restore to factory defaults
PHYSICAL SPECIFICATION
Casing material : Aluminium housing with DIN rail mounting option
Dimensions : 83 x 25 x 74 mm
Weight : 165 g
Mounting options : DIN rail, wall mounting (additional kits needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature : -40 ℃ to 75 ℃
Operating humidity : 10% to 90% non-condensing

Le package standard contient

• Gateway TRB245
• Euro PSU
• 1 x LTE antenna (swivel, SMA male)
• 1x GNSS antenna (adhesive, SMA male, 3 m cable)
• 16 pin terminal block
• 1 x hex key
• Ethernet cable (1.5 m)
• QSG (Quick start guide)
• Packaging box

Codes de commande standard
Code produit : TRB245000000
Code SH : 851762
Code HTS : 8517.62.00
Le paquet contient : Standard Package
Pour plus d informations sur toutes les options d emballage disponibles, veuillez nous contacter directement.
Versions disponibles
Code produit : TRB2450*****, TRB2451*****, TRB2452*****
Région (opérateur) : Europe, the Middle East, Africa, Thailand, North America, Latin America, Australia, New Zealand
La fréquence :

• 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A
• 4G (LTE-TDD): B38, B40, B41
• 3G: B1, B8
• 2G: B3, B8
• 4G (LTE-FDD): B2, B4, B5, B12, B13, B14, B66, B71
• 3G: B2, B4, B5
• 4G (LTE-FDD): B1, B21, B3, B4, B5, B7, B8, B28
• 4G (LTE-TDD): B40
• 3G: B1, B2, B5, B8
• 2G: B2, B3, B5, B8

Le prix et les délais pour les versions spécifiques à la région (opérateur) peuvent varier. Pour plus d informations, contactez nous.
1 - LTE-FDD B2 does not support Rx-diversity.