TRB145

145

Passerelle RS485 à 4G LTE Cat1 IoT légère et puissante. Des performances élevées associées à un micrologiciel basé sur Linux permettent une mise sur le marché rapide dans les applications les plus exigeantes.

La carte de passerelle industrielle LTE Cat 1 TRB145 est équipée d’une interface RS485, d’entrées / sorties numériques et d’un port micro-USB. La conception compacte du TRB145 rend cette passerelle parfaite pour une application où un seul gadget doit être contrôlé à distance via l’interface RS485. Le TRB145 est conçu pour être utilisé dans les applications industrielles, il dispose donc d’une large gamme de fonctionnalités logicielles telles que le contrôle SMS, le pare-feu, Open VPN, IPsec, RMS et la prise en charge FOTA.
MOBILE
Mobile module : 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Bridge : Direct connection (bridge) between mobile ISP and device on LAN
Status : Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/Call : SMS status, SMS configuration, Call utilities
NETWORK
Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, SNMP, MQTT
Connection monitoring : Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
Routing : Static routing
Firewall : Port forwards, traffic rules, custom rules
DHCP : Static and dynamic IP allocation
DDNS : Supported >25 service providers, others can be configured manually
SECURITY
Authentication : Pre-shared key, digital certificates, X.509 certificates Firewall : Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access control : Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN : Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption : DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec : IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE : GRE tunnel
PPTP, L2TP : Client/Server services can run simultaneously
SERIAL COMMUNICATION MODES
Modes : Console, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client
MODBUS
MODBUS TCP SLAVE
ID filtering : Respond to one ID in range [1;255] or any
Allow remote access : Allow access through WAN
Custom registers : Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions : 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS RTU MASTER
Supported baud rates : From 300 to 115200
Supported functions : 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats : 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits : From 5 to 8
Number of stop bits : 1 or 2
Parity : None, Even, Odd
Flow control : None, Xon/Xoff
MODBUS DATA TO SERVER
Protocols : HTTP(S), MQTT
MONITORING & MANAGEMENT
WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTA : Firmware update from sever, automatic notification
SSH : SSH (v1, v2)
SMS : SMS status, SMS configuration
MQTT : MQTT Broker, MQTT publisher
JSON-RPC : Management API over HTTP/HTTPS
Modbus : Modbus TCP status/control
RMS : Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPU : ARM Cortex-A7 1.2 GHz CPU
RAM : 128 MB (50 MB available for userspace)
FLASH memory : 512 MB (200 MB available for userspace)
FIRMWARE / CONFIGURATION
WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA : Update FW/configuration from server
RMS : Update FW/configuration for multiple devices
Keep settings : Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system : RutOS (OpenWrt based Linux OS)
Supported languages : Busybox shell, Lua, C, C++
Development tools : SDK package with build environment provided
INPUT/OUTPUT
Configurable I/O : 2 x Digital Inputs/Outputs
Events : SMS status
POWER
Connector : 4 pin industrial DC power socket
Input voltage range : 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption : < 5 W
PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)
RS485 : RS485 interface, Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200
I/Os : 2 Inputs/Outputs pin on 4 pin power connector
USB : Virtual network interface via USB
Status LEDs : 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM : 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power : 4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas : 1 x SMA for LTE
Reset : Restore factory settings button
PHYSICAL SPECIFICATIONS
Casing material : Aluminum housing
Dimensions : 64.4 mm x 74.5 mm x 25 mm (H x W x D)
Weight : 130 g
Mounting options : Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
OPERATING ENVIRONMENT
Operating temperature : -40 °C to 75 °C
Operating humidity : 10 % to 90 % non-condensing
Ingress Protection Rating : IP30
REGULATORY & TYPE APPROVALS
Regulatory ! CE/RED, EAC, RoHS, WEEE
EMI
Standards : Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESD : EN 61000-4-2:2009
RS : EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT : EN 61000-4-4:2012
Surge protection : EN 61000-4-5:2014
CS : EN 61000-4-6:2014
DIP : EN 61000-4-11:2004
RF
Standards : EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2
SAFETY
Standards : IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017, EN 50385:2017, EN 62232:2017
Le package standard contient
  • TRB145 board
  • Euro PSU
  • 1 x LTE antenna (magnetic mount, SMA male, 3 m cable)
  • Micro-USB cable (0.8 m)
  • 1 x hex key
  • RS485 connector
  • QSG (Quick Start Guide)
  • Packaging box
TRB145
Codes de commande standard
Code produit : TRB145003000, TRB145000000
Code SH : 851762, 851762
Code HTS : 8517.62.00, 8517.62.00
Le paquet contient : Standard Package, Standard Package, no housing
Pour plus d informations sur toutes les options d emballage disponibles, veuillez nous contacter directement.
Versions disponibles
Code produit : TRB145 0*****, TRB145 1*****
Région (opérateur) : Europe, the Middle East, Africa, Korea, Thailand, India, South America, Australia, New Zealand, Taiwan
La fréquence :
  • 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A
  • 3G: B1, B8
  • 2G: B3, B8
  • 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B28
  • 4G (LTE-TDD): B40
  • 3G: B1, B2, B5, B8
  • 2G: B2, B3, B5, B8
Le prix et les délais pour les versions spécifiques à la région (opérateur) peuvent varier. Pour plus d informations, contactez nous.
* - Versions for other regions are under development.
** - For more detailed information, visit our Wiki