Teltonika RUTX09

MOBILE
Mobile module : 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps SIM switch : 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned)
APN : Auto APN
Bridge mode : Direct connection (bridge) between mobile ISP and device on LAN
Status : Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply, scheduled SMS (planned), SMPP (planned)
Black/White list : Operator black/white list
Multiple PDN (planed) : Possibility to use different PDNs for multiple network access and services
Band management : Band lock, Used band status display
ETHERNET
WAN : 1x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN : 3x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
NETWORK
Routing : Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
VoIP passthrough support : H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring : Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall : Port forwards, traffic rules, custom rules
DHCP : Static and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM) : Traffic priority queuing by source/destination, service, protocol or port
DDNS : Supported >25 service providers, others can be configured manually
Network backup : VRRP, Mobile and Wired WAN options, each of which can be used as an automatic Failover
Load balancing: Balance Internet traffic over multiple WAN connections
Hospot : Internal/external Radius server, captive portal, built in customizable landing page
SSHFS (optional) : Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
Authetication : Pre-shared key, digital certificates, X.509 certificates
Firewall : Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention : DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN : Port based and tag based VLAN separation
Mobile quota control : Custom data limits for both SIM cards
WEB filter : Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control : Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN : Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption : DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE : GRE tunnel
PPTP, L2TP : Client/Server instances can run simultaneously
Stunnel : Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN : Method of building scalable IPsec VPNs
SSTP : SSTP client instance support
MODBUS
Modbus TCP slave : ID range 1-255
Modbus TCP master : Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MONITORING & MANAGEMENT
WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA : Firmware update from server, automatic notification
SSH : SSH (v1, v2)
SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (planned), SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS (planned), SMS autoreply, SMPP (planned)
TR-069 : OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
SNMP : SNMP (v1, v2, v3), SNMP trap
JSON-RPC (planned) : Management API over HTTP/HTTPS
MQTT : MQTT Broker, MQTT publisher
RMS : Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPU : Quad-core ARM Cortex A7, 717 MHz
RAM : 256 MB, DDR3
FLASH memory : 256 MB SPI Flash
FIRMWARE / CONFIGURATION
WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA : Update FW/configuration from server
RMS : Update FW/configuration for multiple devices at once
Keep settings : Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system : RutOS (OpenWrt based Linux OS)
Supported languages : Busybox shell, Lua, C, C++
Development tools : SDK package with build environment provided
LOCATION TRACKING
GNSS : GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates : GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA : NMEA 0183
Server software : Supported server software: TAVL, RMS
Mobile Network Geolocation : Get approximate device location on RMS based on mobile cell tower position (without using GPS)
Geofencing : Configurable multiple geofence zones
USB
Data rate : USB 2.0
Applications : Samba share, custom scripts (planned)
External devices : Possibility to connect external HDD, flash drive, additional modem, printer (planned)
Storage formats : FAT, FAT32, NTFS
INPUT/OUTPUT
Input : 1x Digital Input
Output : 1x Digital Output
Events : SMS, Email, RMS
POWER
Connector : 4 pin industrial DC power socket
Input voltage range : 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive) : Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
Power consumption : 9 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet : 4x RJ45 ports, 10/100/1000 Mbps
I/Os : 1 Digital Input, 1 Digital Output on 4 pin power connector
Status LEDs : 3x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LED
SIM : 2x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Power : 4 pin DC connector
Antennas : 2x SMA for LTE, 1x SMA for GNNS
USB : USB A port for external devices
Reset : Factory reset button
PHYSICAL SPECIFICATION
Casing material : Full aluminium housing
Dimensions : 115 mm x 95 mm x 44 mm (H x W x D)
Weight : 455 g
Mounting options : DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
Operating temperature : -40 C to 75 C
Operating humidity : 10 % to 90 % non-condensing
Ingress Protection Rating : IP30
REGULATORY & TYPE APPROVALS
Regulatory : CE/RED, EAC, RoHS, WEEE
EMI IMMUNITY
Standards : Draft EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0
EN61000-4-2:2009 : ESD
RS : EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT : EN 61000-4-4:2012
Surge protection : EN 61000-4-5:2014
CS : EN 61000-4-6:2014
DIP : EN 61000-4-11:2014
RF
Standards : EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.2, EN303 413 V1.1.1
SAFETY
Standards : IEC 62368-1:2014, EN 62368-1:2014 + A11:2017, EN 50665:2017, EN 62311:2008

Le package standard contient

• Router RUTX09
• Euro PSU
• 2 x LTE antennas (swivel, SMA male)
• 1 x GNSS antenna
• Ethernet cable (1.5 m)
• QSG (Quick Start Guide)
• Packaging box

Codes de commande standard
Code produit : RUTX09000000
Code SH : 851762
Code HTS : 8517.62.00
Le paquet contient : Standard package
Pour plus d informations sur toutes les options d emballage disponibles, veuillez nous contacter directement .
Versions disponibles
Code produit : RUTX09 0***** , RUTX09 1*****, RUTX09 4*****
Région (opérateur) : Europe, the Middle East, Africa, APAC2, Brasil, North America, Australia
La fréquence :

• 4G (LTE-FDD) : B1, B3, B5, B7, B8, B20, B28, B321
• 4G (LTE-TDD) : B38, B40, B41
• 3G : B1, B3, B5, B8
• 4G (LTE-FDD) : B2, B4, B5, B7, B12, B13, B25, B26, B291, B30, B66
• 3G : B2, B4, B5
• 4G (LTE-FDD) : B3, B7, B28

Le prix et les délais pour les versions spécifiques à la région (opérateur) peuvent varier. Pour plus d informations, contactez nous.
1 - LTE-FDD B29 and B32 Support Rx Only, and in 2×CA it is Only for Secondary Component Carrier.
2 - Excluding Japan and CMCC.