Teltonika RUT900

MOBILE
Mobile module : 3G – Up to 14.4 Mbps, 2G – Up to 236.8 kbps
SIM switch : 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status : Signal strength, SINR, Bytes sent/received
SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list : Operator black/white list
Band management : Band lock, Used band status display
WIRELESS
Wireless mode : IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi : WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter
WiFi security : WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
SSID : SSID stealth mode and access control based on MAC address
WiFi users : Up to 100 simultaneous connections
Wireless Hotspot : Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN : 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN : 3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
Routing : Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Network protocols : TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
VoIP passthrough support : H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring : Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall : Port forward, traffic rules, custom rules
DHCP : Static and dynamic IP allocation, DHCP Relay
QoS : Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS : Supported >25 service providers, others can be configured manually
Network backup : VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancing : Balance your internet traffic over multiple WAN connections
NetSnapper (optional) : Mobile connection management, data compression VPN client (not available in standard FW)
SSHFS (optional) : Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
Authentication : Pre-shared key, digital certificates, X.509 certificates
Firewall : Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention : DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
WiFi security : WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation
VLAN : Port based and tag based VLAN separation
Mobile quota control : Set up custom data limits for both SIM cards
WEB filter : Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control : Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN Multiple : clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption : DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec : IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE : GRE tunnel
PPTP, L2TP : Client/Server services can run simultaneously
Stunnel : Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
SSTP : SSTP client instance support
MODBUS
/strong>MODBUS TCP SLAVE
ID range : 1-255
MODBUS TCP MASTER
Supported functions : 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped)
MONITORING & MANAGEMENT
WEB UI : HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA : Firmware update from server, automatic notification
SSH : SSH (v1, v2)
SMS : SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069 : OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT : MQTT Broker, MQTT publisher
SNMP : SNMP (v1, v2, v3), SNMP trap
JSON-RPC : Management API over HTTP/HTTPS
MODBUS : MODBUS TCP status/control
RMS : Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPU : Atheros Wasp, MIPS 74Kc, 550 MHz
RAM : 128 MB, DDR2
FLASH memory : 16 MB SPI Flash
FIRMWARE / CONFIGURATION
WEB UI : Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA : Update FW/configuration from server
RMS : Update FW/configuration for multiple devices
Keep settings : Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system : RutOS (OpenWrt based Linux OS)
Supported languages : Busybox shell, Lua, C, C++
Development tools : SDK package with build environment provided
INPUT/OUTPUT
Input : 1 x Digital non-isolated input (on 4 pin power connector)
Output : 1 x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
Events : SMS, EMAIL, RMS
POWER
Connector : 4 pin industrial DC power socket
Input voltage range : 9 – 30 VDC (4 pin industrial socket), reverse polarity protection; surge protection >31VDC 10us max
PoE (passive) : Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards
Power consumption : < 2 W idle, < 7 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet : 4 x RJ45 ports, 10/100 Mbps
I/O’s : 1 Digital Input, 1 Digital Output on 4 pin power connector (available from HW revision 1600)
Status LEDs : 1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED
SIM : 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
Power : 4 pin DC connector
Input/Output : 2 programmable Inputs/Outputs
Antennas : 2 x SMA for 3G, 2 x RP-SMA for WiFi antenna connectors
Reset : Reset/restore to default button
PHYSICAL SPECIFICATION
Casing material : Aluminium housing, plastic panels
Dimensions : 50 mm x 100 mm x 110 mm (H x W x D)
Weight : 280 g
Mounting options : DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
Operating temperature : -40 °C to 75 °C
Operating humidity : 10% to 90% non-condensing
Ingress Protection Rating : IP30
MTBF : 270000 h
REGULATORY & TYPE APPROVALS
Regulatory : CE/RED, EAC, RoHS, WEEE
EMI IMMUNITY
Standards : Draft EN 303 446-1 V1.1.0
ESD : EN61000-4-2:2009
RS : EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT : EN 61000-4-4:2004
Surge protection : EN 61000-4-5:2006
CS : EN 61000-4-6:2009
DIP : EN 61000-4-11:2004
RF
Standards : EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1
SAFETY
Standards : IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 62311:2008

Le package standard contient

• Router RUT900
• Euro PSU
• 2 x 3G antennas (swivel, SMA male)
• 2 x WiFi antennas (swivel, RP-SMA male)
• Ethernet cable (1.5 m)
• QSG (Quick Start Guide)
• Packaging box

Codes de commande standard
Code produit : RUT900 S024E0
Code SH : 851762
Code HTS : 8517.62.00
Le paquet contient : Standard package
Pour plus d informations sur toutes les options d emballage disponibles, veuillez nous contacter directement.
Versions disponibles
Code produit : RUT900 S*****
Région (opérateur) : Global
La fréquence :

• 3G: B1, B2, B5, B8, B19
• 2G: B2, B3, B5, B8

Le prix et les délais pour les versions spécifiques à la région (opérateur) peuvent varier. Pour plus d informations, contactez nous.
* - For more detailed information, visit our Wiki